Hiện tại, điện áp của quạt chúng tôi sản xuất là điện áp DC và một công tắc điện tử cố định (như IC Hall) được sử dụng để thay thế bàn chải và công tắc hiện tại được triển khai để điều khiển rôto tiếp tục chạy. Nó được gọi là "dc fanless không chổi than ", còn được gọi là "DC Axial Fan ". Xingdong chủ yếu có 5V, 12V, 24V, 48V và các quạt trục DC khác.

At present, the voltage of the fan we produce is DC voltage, and a fixed electronic switch (such as Hall IC) is used to replace the brush, and the current switch is implemented to drive the rotor to continue to run. It is called a "DC brushless fan", also called "DC axial fan". Xingdong mainly has 5v, 12v, 24v, 48v and other DC axial fans.

At present, the voltage of the fan we produce is DC voltage, and a fixed electronic switch (such as Hall IC) is used to replace the brush, and the current switch is implemented to drive the rotor to continue to run. It is called a "DC brushless fan", also called "DC axial fan". Xingdong mainly has 5v, 12v, 24v, 48v and other DC axial fans.

The cross-flow of a tangential fan, sometimes known as a tubular fan, was patented in 1893 by Paul Mortier and is used extensively in heating, ventilation, and air conditioning (HVAC), especially in ductless split air conditioners. The fan is usually long concerning the diameter, so the flow remains approximately two-dimensional away from the ends. The cross-flow fan uses an impeller with forward-curved blades, placed in a housing consisting of a rear wall and a vortex wall. Unlike radial machines, the main flow moves transversely across the impeller, passing the blading twice. What follows is a more detailed explanation of it and its functions. Below are some details about cross-flow fans and aluminum alloy cross flow fans.